Underwater Digital Photography. Want to try some adventure? Be careful though, it’s not always what you think. Taking picture underwater is way different than in normal conditions. read through to learn more about underwater digital photography. It’s getting more and more affordable to do underwater digital photography with excellent results. At the lowest end of the spectrum one photography retailer was offering a camera and extra memory card with reasonable memory for underwater digital photography for less than $40.00. That camera was good to 100 feet and it had its own flash. Admittedly it was an automatic point and shoot and that may not be what you want for underwater digital photography.

Being able to set things like white balance is very important to success in underwater digital photography. If you think you understand white balance in day to day photography, think again because it’s somewhat different for underwater digital photography. White balance tells your camera how to read the color in the situation based on what it considers to be white. Normally using the auto settings on you camera will do a find job. However, using auto white balance settings in underwater digital photography may get you a murky color output.

You will need to judge the scene yourself in underwater digital photography. For example, if you are near or below 40 feet, then you will probably want to set the white balance on your camera for cloudy – because it warms up normally bluer light. Shooting above 35 feet or with a flash you can use the daylight setting. That will give the best color outcomes. The visibility levels of the waters where you are making the dive are very important in underwater digital photography. Murky waters also calls for a cloud or shade setting.

The most important element in underwater digital photography is the housing of your camera because that’s what protects the camera and the memory card. There are many sites on the web that will tell you what to do for a pre-dive check on your camera housing. My advice is the Google something like pre-dive check for underwater digital photography and then read the several articles from the search. If you don’t want to take the time to do that here it is in the short form.

Think O-ring. It is the o-ring that provides the seal for housing which is what protects your camera in underwater digital photography. If little bits of sand or dried salt get in that o-ring, that can causes a leak. Be sure to do a pre-dive check of your camera that includes both a visual check and going around that o-ring with your fingers, being careful not to stretch it, then you can find and remove anything that cause it to leak. Another pre-dive check for underwater digital photography is to immerse the camera with the lens pointing down so that any water goes to the bottom of the housing without damaging the camera.

Your best bet before deciding upon a camera for underwater digital photography is to read several reviews in your price range. Pay close attention to user ratings of how easy the camera is to use and how the photos turn out. Important things to consider are the failure rate of the housing, how deep the housing will safely go and having the ability to manually set the camera’s white balance. In underwater digital photography, the same considerations apply whether you are buying a camera to use during snorkeling or scuba diving.

Leave a Reply

Your email address will not be published. Required fields are marked *